Call Us Today! 604.294.9191|info@loadpath.ca

Industrial

Jimmy 1
Jimmie Creek Run-of-River Powerhouse Jimmie Creek Run-of-River Powerhouse

Jimmie Creek Run-of-River Powerhouse

Jimmie Creek Run-of-River Powerhouse

Location: Toba Inlet, British Columbia

LoadPath supplied and installed this 8,600 sq. ft. Jimmie Creek Run-of-River Powerhouse housing an 80ton bridge crane for servicing the generator.

Horsey 4
Horsey Substation Horsey Substation

Horsey Substation

Horsey Substation

Location: Horsey Substation, Victoria, BC 

This 6,000 sq. ft. structure houses the new switchgear for the main power transmission for Victoria.  Designed and fabricated in the fall of 2014 and substantially completed in March of 2015.  LoadPath completed this small yet complex project in a tight schedule on a BC Hydro active transmission site.

 

Rail 5
Canfor Rail Car Unloading Canfor Rail Car Unloading

Canfor Rail Car Unloading

Canfor Rail Car Unloading

Location: Canfor Pulp Mill, Prince George, BC

This 3,000 sq. ft. structure housing two rail cars for the Canfor Pulp Mill.  Designed and fabricated in February of 2015 and substantially completed in May of 2015.  LoadPath performed this work for Canfor Pulp directly.

kokish1
BC Hydro Kokish River Substation- Control Building BC Hydro Kokish River Substation- Control Building

BC Hydro Kokish River Substation- Control Building

BC Hydro Kokish River Substation- Control Building

Supply and install of the BC Hydro Control Building – 1,300 sq. ft.

haa-ak-suuk1
Haa-ak-suuk Powerhouse Haa-ak-suuk Powerhouse

Haa-ak-suuk Powerhouse

Haa-ak-suuk Powerhouse

Haa-ak-suuk Creek Hydro Limited Partnership Supply of a new Powerhouse Building 2,600 sq. ft.

tolko1
Tolko – Log Pond Upgrade Tolko – Log Pond Upgrade

Tolko – Log Pond Upgrade

Tolko – Log Pond Upgrade

Tolko Industries LTD. Athabasca Division, Reconstruction of the existing Log Pond building at Tolko Athabasca, raising the roof by 30ft to accommodate a new Tanguay Grapple at the mill in-feed.

montrose-005
Plutonic Power – Montrose Power Generation Building Plutonic Power – Montrose Power Generation Building

Plutonic Power – Montrose Power Generation Building

Plutonic Power – Montrose Power Generation Building

LoadPath’s assignment on this project was to provide 2 powerhouse structures for Plutonic’s Run-of-the-River green power hydroelectric generation stations.  Completed under sub-contract to Peter Keiwit & Sons, both the Toba and Montrose projects are located up Toba Inlet on BC’s rugged south coast.  Completed in 2009 and 2010, these buildings will house the largest run-of-the-river turbine-generators in BC. Each project was different, with design similarities, but different layouts. Both buildings were designed to meet “post-disaster” requirements under the building code, so they are heavily framed and braced. The Montrose project is slightly smaller than its Toba brother and its powerhouse structure was required to support a 125 tonne generator servicing bridge crane. This crane was also used to construct the turbine generator.  LoadPath is proud to have been part of Keiwit’s construction team on this very interesting project.

toba-008
Plutonic Power – East Toba River Generation Building Plutonic Power – East Toba River Generation Building

Plutonic Power – East Toba River Generation Building

Plutonic Power – East Toba River Generation Building

LoadPath’s assignment on this project was to provide 2 powerhouse structures for Plutonic’s Run-of-the-River green power hydroelectric generation stations.  Completed under sub-contract to Peter Keiwit & Sons, both the Toba and Montrose projects are located up Toba Inlet on BC’s rugged south coast.  Completed in 2009 and 2010, these buildings house the largest run-of-the-river turbine-generators in BC. Each project was different, with design similarities, but different layouts.  Both buildings were designed to meet “post-disaster” requirements under the building code, so they are heavily framed and braced.  With the Toba project having the greater generating capacity, its powerhouse structure was required to support a 160 tonne generator servicing bridge crane. This crane was also used to construct the turbine generator.  LoadPath is proud to have been part of Keiwit’s construction team on this very interesting project.

wey-2
Weyerhaeuser Pulp Mill Steam Generator Building Weyerhaeuser Pulp Mill Steam Generator Building

Weyerhaeuser Pulp Mill Steam Generator Building

Weyerhaeuser Pulp Mill Steam Generator Building

Working for Weyerhaeuser Engineering Services, LoadPath designed, supplied and erected this powerhouse structure into very tight quarters between two other existing plant buildings.  While only 5300 sq. ft. in footprint, this building had to do the job of a much larger structure, and includes 3 levels of mezzanine and numerous pipe and cable tray supports.  Fitting everything into such a tight space required a lot of detailed engineering and planning.  We don’t think a 50MW generator has ever been installed in so small a building.

nb005
Natural Gas Combustion Turbine and Steam Generator Complex Natural Gas Combustion Turbine and Steam Generator Complex

Natural Gas Combustion Turbine and Steam Generator Complex

Natural Gas Combustion Turbine and Steam Generator Complex

Working for Kiewit’s Energy Division out of Kansas City, LoadPath teamed up with Needham and Associates to design, supply and install all the structures on this very large project. A natural gas fired combined cycle plant, our buildings house all the required facilities, including Turbine Hall, HSRG, Water Treatment, Warehousing and Administration buildings. This fast-track industrial project began with design in August 2010, construction in October and was substantially completed in late fall, 2011.